This original Hewitt Lift continues to be one of our most popular models. These rugged general purpose lifts have a natural mechanical advantage that actually makes operation easier as the boat is raised higher. Cantilever Lifts also have a long history of trouble-free performance. They require few moving parts for superior reliability and place less stress on pulleys and cables. In the lift's fully raised position, cables carry no weight, the load is entirely supported by the frame. Corrosion resistant aluminum construction also assures low maintenance - no rust, no painting.
The Hi-Lift is an economical, direct vertical rise lift that is ideally suited for deeper water applications or sites where water levels may fluctuate. These lifts are based on simple, proven technology but are distinguished by rock-solid construction and unique frame design. Hi-Lifts incorporate side bars that provide greater stability than "V" style side designs. Side bars are also set lower for easier boat access.
These models offer the convenience of push button or wireless remote control operation. Additionally, they can raise and lower boats in seconds. You'll never hesitate to use your boat again. The Hydraulic Lift Series also offers a wider range of models with capacities from 4.400 lbs. to a massive 10,100 lbs. With optional bracing and leg kits, these lifts can be used in water up to 8' deep.
All models include a locking water resistant chest that houses the hydraulic pump and control system. For DC models, the chest also provides space for housing batteries. The hydraulic system uses biodegradable hydraulic fluid that will not harm lakes or rivers. The fluid’s anti-freezing properties also simplifies winter storage. A translucent fluid reservoir makes it easy to check fluid level at a glance. Models up to the 6,100 lb. capacity are equipped with two hydraulic cylinders, while the 10,100 lb. model uses four cylinders to meet the higher load requirement. Standard cylinders have long-lasting seals designed for underwater use and hoses with water resistant covering. Optional aluminum cylinders with stainless steel shafts are available on some models.
Dragging your personal watercraft or small boat across a rocky shore to take a break or make repairs can ruin your hull (and your back). Hewitt has a better solution . . . a SINGLE or DOUBLE P.W. Lift. Raise and lower your light craft without strain or damage. Range of capacities from 700 lbs. to 1800 lbs.
Hewitt’s Narrow Pontoon Lifts safely and easily raise and lower even the longest pontoon boats. Full-length beams are positioned between the pontoons, not beneath them. This design evenly distributes weight to the boat’s deck, eliminating any risk of damage to the pontoons. Narrow Pontoon Lifts are available in three standard sizes: 2000 lb. - 20' length, 2400 lb. - 24' length and 3000 lb. - 28' length. These lifts are built to the same high standards of durability that are a trademark of all Hewitt Lifts.
